CLIPS FOR TILE LEVELLING SYSTEM B.L.S 100PCS 1MM (FOR TILE THICKNESS 3-20MM)

DESCRIPTION:

CLIPS 1mm thick (tile height 3-20mm)

• B.L.S leveling system (SCREW) using heavy type caps (orange) and clips (white).

• They are made of high quality material which is strong and flexible but not very fragile, thus avoiding accidental breakage.

• Place the cap on top of the clip and rotate it with only 2 fingers. In a short time it has touched the tile. Then tighten it until the tiles are aligned.

• When the glue dries, remove the caps by tapping them with a mallet or foot parallel to the joint. Alternatively you can unscrew them and click the clips directly.

• The caps are designed to offer great ergonomics both in their initial placement and in the alignment of the tiles.

• The design of the caps is such that allows the user to use them both on the sides of the tiles and at the intersections of the joints.

• The B.L.S (SCREW) system does not need any tools.

• The clips leave a joint of 1mm and are suitable for tiles with a thickness of 3-20mm.

• To create larger joints you can use them in parallel with classic tile crosses.

• It has all the certifications of European quality standards.

Their excellent quality and durability make them particularly suitable for professional tiles.

SUPERIOR QUALITY